JSP Force F-2110 A1 Filter (Pack of 2)

The JSP F-2110 A1 Filter (Pack of 2) is designed for use with the JSP Force 8 Half Mask Respirator or the JSP Force 10 Typhoon Full Face Mask.  The A1 filter will protect against organic vapours and gases such as white spirit and solvent based paint fumes.

Please note these filters are not suitable for stand-alone use. Both filters in the pack are needed for the respirator to function.

What Can the A1 Filter Do for Me?

The filter has several useful features. These include:

• Field of Vision: Low profile angle for minimal visual impairment
• Convenient: Integral maintenance-free disposal inhalation valve, easy to attach securely to the respirator
• Protection: A1 filters protect against organic vapours and gases
• Odour Management: Activated carbon layer disperses nuisance odours such as varnish

Who Can Use the Filter?

The filter is designed for use with the JSP Force 8 Half Mask Respirator or the JSP Force 10 Typhoon Full Face Mask. When used in conjunction with these masks A1 filters protect against organic vapours and gases with boiling points greater than 65°C. All filters from this range also protect against organic/inorganic vapours, fumes, gases and liquid aerosols when used with these masks.

What Hazards Can A1 Filters Protect Against?

Following is a list of specific hazards from which the filter will shield the wearer:

• Fine dusts
• Mists
• Water based painting
• Glyphosate
• Fibres and fibre glass
• Woods shavings and dust
• Paint thinner

How Do I Fit the Filters?

To fit the filters please follow these simple instructions. First, align the arrows on the mask and the filter. Second, twist the cartridge clockwise into the face mask inlet using the easy bayonet fitting. The filters should then be securely fitted.

What Certifications Has the Filter Received?

The filter has undergone a variety of tests so you can be sure of your safety at work. It has achieved the following certifications:

• EN 14387

What Do These Certifications Mean?

• EN 14387: This standard specifies the requirements for gas filters and combined filters for use as components in unassisted respiratory protective devices

The gas filter is certified as suitable for use as a component of a unassisted respiratory protective device. It has an assigned performance factor of 10 when used in conjunction with the JSP Force 8 Half Mask Respirator and a factor of 20 when used with the JSP Force 10 Typhoon Full Face Mask. 

Technical Details

• Materials:
  • ABS (polymer)

Documentation

Data

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually displayed at the top of the page before adding the product to your basket. For products marked "In Stock Now", these will normally be dispatched either on the same day (if placed before 14:00 on a working day) or the next working day.

Please contact our Customer Care Team on 020 7501 0598 for an up-to-the-minute delivery expectation for this product.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.