HexArmor Chrome SLT 4061 Cut Resistant Arc Flash Gloves
Though uncommon, arc flashes pose a serious threat to those who work in electrical facilities, so it's important to protect your hands where possible. Tested in accordance with the latest arc flash directives (HRC), the HexArmor Chrome SLT 4061 Cut Resistant Arc Flash Gloves provide industrial workers with an impressive arc flash rating of Level 4, along with Level E cut protection and 250°C heat resistance.
Key Information
- Glove Codes:
- 4061-S
- 4061-M
- 4061-L
- 4061-XL
- EN 388:2003 Rating: 2X23E
- EN 407 Rating: 422141
- Arc Flash Rating: Level 4
- Size Range: 7 - 10
- Supplied as a pair
Which Size Should I Choose?
To find the right size for you, please measure the circumference of your hand (excluding the thumb) around your knuckles with your fingers closed, as shown in the diagram below. Then, match your measurement to the corresponding size in the sizing guide below the diagram, and select using the drop-down menus near the top of the page.
| Glove Size | Palm Width | Hand Length |
| Size 7 (Small) | 87mm | 245mm |
| Size 8 (Medium) | 90mm | 255mm |
| Size 9 (Large) | 97mm | 260mm |
| Size 10 (Extra Large) | 102mm | 265mm |
Why Should I Buy the HexArmor Chrome SLT 4061 Arc Flash Gloves?
- Outstanding Arc Flash Protection: Lab tested in accordance with HRC at 46 Cal/cm2
- Impressive Heat Resistance: Tested in accordance with EN 407 for impressive range of resistances
- Level E Cut Protection: ISO Blade Cut tested to Level E, one of the highest cut resistances available
- Goatskin Leather Palms: Provide exceptional abrasion protection across palms
- Grippy Feel: Greasy or dry, these gloves will handle well
- SlipFit Cuffs: Patented cuff style allows for easy donning and removal between tasks
Where Can I Use the HexArmor Chrome SLT 4061 Gloves?
Thanks to their impressive level of protection in a variety of hazardous conditions, the HexArmor Chrome SLT 4061 are designed for high risk workplaces with risk of arc flashes. Suitable tasks include:
- Power Stations
- Electricians
- Construction
- Glass Handling
- Refineries
- Sheet Metal Handling
- Metal Fabrication
- Offshore Work
- Electronics
- Repairs
What Can the HexArmor Chrome SLT 4061 Protect Me From?
To ensure these gloves provide you with the protection you need, they have been tested to a range of different standards. The results of mechanical resistance tests under EN 388 and EN 407 can be found in the tables below. More information on the standards to which these gloves have been certified can be found in the PDF documents near the bottom of this page.
EN 388
| Hazard | Resistance Level |
| Abrasion Resistance | Level 2 |
| Cut Resistance | N/A |
| Tear Resistance | Level 2 |
| Puncture Resistance | Level 3 |
| ISO Blade Cut Resistance | Level E |
EN 407
| Property | Resistance Level |
| Burning Resistance | Level 4 |
| Contact Heat Resistance | Level 2 |
| Convective Heat Resistance | Level 2 |
| Radiant Heat Resistance | Level 1 |
| Molten Metal Resistance (Small Splashes) | Level 4 |
| Molten Metal Resistance (Large Splashes) | Level 1 |
SlipFit Cuffs and Dexterous Action
The HexArmor Cut Resistant Gloves utilise a close-fitting, anatomic design and patented technology to provide impressive touch sensitivity and dexterity. Not only will these gloves feel like a second skin, but their SlipFit cuffs allow for incredible speed as you pull them on and off.
Molten Metal and Heat Protection
The HexArmor Chrome SLT 4061 Gloves are constructed from retardant materials to keep the wearer safe from burning heat sources. Not only will the gloves insulate the weather against hot contact temperatures of 250°C, but will also ensure high-tier protection against molten splashes, making them great for refineries.
Documentation for the HexArmor Chrome SLT 4061 Gloves
| Conformity Statement | Instructions for Use |
 | |
