Ejendals Tegera 909 PU Palm-Coated Handling Gloves

With Level 3 cut resistance and a polyurethane palm coating, the Ejendals Tegera 909 PU Palm-Coated Handling Gloves not only protect from cuts and grazes, but have oil-repellent properties and excellent grip as well. They are supplied in a grey design with Dyneema Diamond Technology that prohibits the release of glove fibres and feature a knitwrist cuff for additional comfort and easy fit.

Key Information

• Glove Code: 909
• EN 388:2003 Rating: 3332
• EN 420
• Size Range: 6 - 10
• Supplied as a pair

Resistance of the Ejendals 909 PU Palm-Coated Gloves

The Ejendals Tegera 909 Palm-Coated Handling Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:

EN 388

Uses of the Ejendals 909 PU Palm-Coated Gloves

The Ejendals Tegera 909 Gloves are designed to be easily used in dirty and greasy environments. This makes them suitable for the following applications:

• Assembly work
• Automotive
• Brick handling
• Building
• Carpentry
• Concrete handling
• Construction
• Electrical installation
• Fine assembly
• Glass handling
• HVAC (Heating, ventilation and air conditioning) installation
• Installation
• Metal work
• Sheet metal handling
• Soil preparation
• Transportation
• Wood industry

The 909 Gloves are designated Level II gloves, which makes them suitable for most intermediate risks. Gloves are placed in this category when the risk is not assessed as irreversible.

Features of the Ejendals Tegera 909 Handling Gloves

• Light nylon gloves palm dipped with polyurethane
• Oil repellent for use in greasy and dirty environments
• Ensure excellent fingertip sensitivity and good grip in the palm
• Supplied with Dyneema Diamond Technology that prohibits the release of fibres
• Feature a knitwrist cuff for additional comfort and protection
• Provide protection against:
  • Abrasion injuries
  • Contact with dirt
  • Contact with fat
  • Contact with oil
  • Cut injuries

Sizing of the Tegera 909 PU Palm-Coated Gloves

The Tegera 909 Gloves are available in five sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.

Materials of the Tegera PU Palm-Coated Gloves

• Liner Material: Dyneema Diamond Technology, Lycra, nylon, 18gg
• Dipping: Palm-dipped
• Dipping Material: Polyurethane
• Grip Pattern: Smooth finish
• Material Specification: UHMWPE (60%), nylon (10%), elastane (10%), polyurethane (20%)

Documentation for the Tegera Handling Gloves

Conformity Statement	Instructions for Use

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually displayed at the top of the page before adding the product to your basket. For products marked "In Stock Now", these will normally be dispatched either on the same day (if placed before 14:00 on a working day) or the next working day.

Please contact our Customer Care Team on 020 7501 0598 for an up-to-the-minute delivery expectation for this product.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.