Ejendals Tegera 881 Nitrile 3/4 Dipped Assembly Gloves
With oil and water repellent properties in the palm and knuckle, the Ejendals Tegera 881 3/4 Dipped Assembly Gloves are suitable for use in dirty, oily and greasy environments. Their excellent fingertip sensitivity and knitwrist cuff ensure they can be used for high precision work, while offering high levels of comfort.
Key Information
- Glove Code: 881
- EN 388:2003 Rating: 4131
- EN 420
- Size Range: 7 - 10
- Supplied as a pair
Resistance of the Ejendals 881 3/4 Dipped Gloves
The Tegera 881 Nitrile 3/4 Dipped Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 4 |
Cut Resistance | Level 1 |
Tear Resistance | Level 3 |
Puncture Resistance | Level 1 |
Uses of the Tegera 881 Assembly Gloves
The Tegera 881 Nitrile Assembly Gloves are designed for use in oily, greasy an dirty environments. This makes them suitable for the following applications:
- Assembly
- Automotive
- Building
- Construction
- Engineering
- Fine assembly
- HVAC (Heating, ventilation and air conditioning) installation
- Inspection
- Installation
- Machine operation
- Maintenance, repairs and operations (MRO)
- Oil and gas
- Petrochemical industry
- Soil preparation
- Warehouse work
The 881 3/4 Dipped Assembly Gloves are designated Category II gloves, meaning that they should be suitable for most medium-weight tasks.
Features of the Tegera 881 3/4 Dipped Gloves
- Lightweight lycra/nylon gloves with great fingertip sensitivity
- Dipped with nitrile for water and oil-repellent properties in the palm and knuckle
- Suitable for a variety of light to medium work applications
- Designed for use in oily, greasy and dirty environments
- Supplied in a black/blue design with a knitwrist cuff for improved comfort
- Provides protection against:
- Abrasion injuries
- Contact with damp
- Contact with dirt
- Contact with fat
- Contact with oil
- Grazes
- Lacerations
- Scratches
Sizing of the Tegera 881 Nitrile Assembly Gloves
The Tegera 881 Gloves are available in four sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 7 | 178mm | 171mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Materials of the Ejendals Tegera 881 Gloves
- Liner Material: Lycra, nylon
- Dipping: 3/4 dipped
- Dipping Material: Nitrile, nitrile material
- Grip Pattern: Reinforced grip pattern
- Material Specification: Nitrile (40%), nylon (50%), elastane (10%)
Documentation for the Tegera Nitrile Gloves
Conformity Statement | Instructions for Use |
| |