Ejendals Tegera 322 Insulated Cold-Resistant Handling Gloves
Designed for light handling and assembly work, the Ejendals Tegera 322 Insulated Cold-Resistant Handling Gloves have a warm fleece lining to ensure comfort in cold conditions. Ideal for cold indoor environments such as unheated warehouses and cold stores, they have good fingertip sensitivity and flexibility for fine handling tasks.
Key Information
- Glove Code: 322
- EN 388:2003 Rating: 2131
- EN 511 Rating: 01X
- EN 420
- Size Range: 8 - 10
- Supplied as a pair
Resistance of the Tegera 322 Insulated Cold-Resistant Handling Gloves
The Ejendals Tegera 322 Handling Gloves have been tested in accordance with European standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 2 |
Cut Resistance | Level 1 |
Tear Resistance | Level 3 |
Puncture Resistance | Level 1 |
EN 511
Property | Resistance Level |
Convective Cold Resistance | Level 0 |
Contact Cold Resistance | Level 1 |
Water Penetration Resistance | N/A |
Uses of the Ejendals Tegera 322 Insulated Cold-Resistant Gloves
With a cold-resistant, comfortable design, the Ejendals 322 are suitable for a variety of light handling tasks. Typical applications include:
- Airport work
- Assembly
- Cold stores
- Freezers
- Inspection work
- Installation work
- Machine driving
- Machine operation
- Transport work
- Warehouse work
The Ejendals 322 are designated Category II gloves, meaning they are suitable for medium-duty applications and intermediate levels of risk.
Key Features of the Ejendals 322 Cold-Resistant Gloves
- Lightweight gloves with thermal insulation
- Soft, highly comfortable design
- Chrome free for reduced irritation
- Reinforced index finger for improved durability
- Provides protection against:
- Abrasion injuries
- Blisters
- Chapping/drying out
- Chrome allergy
- Contact with cold
- Contact with dirt
- Grazes
- Lacerations
- Scratches
Sizing of the Ejendals Tegera 322 Handling Gloves
The Ejendals 322 are available in three different sizes. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
The Ejendals 322 are precision work gloves which are designed for a close fit.
Materials of the Ejendals Tegera 322 Assembly Handling Gloves
- Palm Material: Synthetic leather
- Back Material: Polyester
- Outer Material Specification: Polyurethane (50%), polyester (49%), elastane (1%)
- Inner Material Specification: Acrylic (100%)
Documentation for the Ejendals Tegera 322 Insulated Handling Gloves
Conformity Statement | Instructions for Use |
| |