Ejendals Tegera 30 ESD Anti-Static Electronics Work Gloves
Electrostatic discharge is a serious risk in a variety of industrial workplaces – both to personnel and to products, and in order to effectively combat ESD it's vital that anti-static workwear is utilised. The Ejendals Tegera 30 ESD Anti-Static Electronics Work Gloves have been specifically developed for electronic installation and assembly applications. Conforming to the International Electrotechnical Commission's standard for ESD products, they provide a high level of dexterity and fingertip sensitivity for precise handling tasks.
Key Information
- Glove Code: 30
- EN 388:2003 Rating: 2000
- IEC 61340-5-1:2007: R: 6.0x10⁵ Ω – 5.4x10⁸ Ω
- EN 420
- Size Range: 5 - 12
- Supplied as a pair
Resistance of the Ejendals Tegera 30 ESD Anti-Static Work Gloves
The Ejendals Tegera 30 have been tested in accordance with European standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 2 |
Cut Resistance | Level 0 |
Tear Resistance | Level 0 |
Puncture Resistance | Level 0 |
Uses of the Ejendals Tegera 30 ESD Anti-Static Work Gloves
The Ejendals Tegera 30 Anti-Static Work Gloves are ideal for assembly and manufacturing work for where ESD is a risk. Typical applications include:
- Assembly
- Automotive
- Electrical installation
- Electronics work
- Inspection work
- Installation work
The Ejendals Tegera 30 are designated Category II gloves, meaning they are suitable for medium-duty applications and intermediate levels of risk.
Key Features of the Ejendals Tegera 30 ESD Electronics Work Gloves
- Anti-static electronics work gloves
- IEC rated for electrostatic discharge
- Ideal for electronic installation and assembly
- Supple full-grain goatskin palm for dexterity
- Reinforced index finger for improved durability
- Provides protection against:
- Abrasion injuries
- Blisters
- Contact with dirt
- Grazes
- Lacerations
- Scratches
- Static electricity
Sizing of the Ejendals 30 ESD Electronic Assembly Gloves
The Ejendals Tegera 30 ESD Electronics Work Gloves are available in eight different sizes, meaning they should be suitable for the vast majority of users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 5 | Under 152mm | Under 160mm |
Size 6 | 152mm | 160mm |
Size 7 | 178mm | 171mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Size 11 | 279mm | 215mm |
Size 12 | Over 279mm | Over 215mm |
As Electronics Work Gloves, the Ejendals 30 are designed for a close fit, they have a palm thickness of between 0.6mm and 0.7mm.
Materials of the Ejendals 30 ESD Anti-Static Protection Gloves
- Palm Material: Full-grain goatskin of top quality
- Back Material: Nylon
- Material Specification: Leather (50%), nylon (49%), natural latex (1%)
Documentation for the Ejendals Tegera 30 ESD Anti-Static Gloves
Conformity Statement | Instructions for Use |
| |