Ejendals Tegera 295 Insulated Waterproof Gloves
Designed specifically for fine handling in cold temperatures, the Ejendals Tegera 295 Insulated Waterproof Gloves are perfect for a range of different industries and applications. Featuring a waterproof lining, the Tegera 295 Gloves are not only ideal for cold environments, but can keep hands dry too.
Want to buy the Ejendals 295 Gloves in bulk. Check out our Ejendals Pack of 6 295 Gloves Bulk Pack with money off!
Key Information
- Glove Code: 295
- EN 388:2003 Rating: 2121
- EN 511 Rating: 121
- EN 420
- Size Range: 6 - 12
- Supplied as a pair
Resistance of the Ejendals 295 Insulated Waterproof Gloves
The Ejendals Tegera 295 Waterproof Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 2 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 2 |
| Puncture Resistance | Level 1 |
EN 511
| Property | Resistance Level |
| Convective Cold Resistance | Level 1 |
| Contact Cold Resistance | Level 2 |
| Water Permeability | Level 1 |
Uses of the Ejendals Insulated Gloves
With a general design that prevents against the cold and the wet, there are a number of situations in which the Tegera 295 Gloves can be used. Some of those applications include:
- Agricultural work
- Airport work
- Building work
- Construction
- Carpentry
- Installation work
- Forestry work
- Gardening
- General repair work
- HVAC installation
- Logistics
- Machine driving
- Machine operation
- Soil preparation
- Transportation
- Utilities
- Wood handling
The 295 Insulated Gloves are designated Category II gloves, meaning that they should be suitable for most medium-weight tasks. They are designed specifically for use in cold and wet environments, making them ideal for most winter and outdoor work that doesn't include other hazards.
Key Features of the Ejendals Tegera 295 Gloves
- Cold insulation gloves designed for winter and outdoor work
- Provide extremely good fingertip sensitivity, ideal for fine-motor work
- Flexible design is comfortable and allows dexterity
- Feature "Thinsulate" material that keeps hands warm without adding bulk to gloves
- Elastic closure with a 360° design for greater comfort
- Stylish and understated white, grey, and blue design
- Reinforced finger and thumb for greater longevity
- Provides protection against:
- Abrasion injuries
- Blisters
- Contact with cold
- Contact with dirt
- Contact with moisture or damp
- Grazes
- Lacerations
- Scratches
Sizing of the Ejendals Tegera 295 Gloves
The Tegera 295 Waterproof Gloves are available in seven sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
SIZING ADVICE: We recommend selecting one size larger than your measurements indicate, as Tegera 295 Gloves can often be found to be quite tight fitting.
| Size | Circumference (mm) | Length (mm) |
| Size 6 | 152mm | 160mm |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
| Size 12 | Over 279mm | Over 215mm |
Materials of the Ejendals Tegera 295
- Palm Material: Full grain goatskin
- Back Material: Spandex
- Lining Material: Thinsulate 40g
- Outer Material Specification: Leather (49%), elastane (25%), polyester (25%), natural latex (1%)
- Middle Material Specification: Polyethylene (100%)
- Inner Material Specification: Polyester (100%)
Documentation for the Ejendals Tegera 295 Work Gloves
| Conformity Statement | Instructions for Use |
 | |
