ATG MaxiCut 89-5740 ULTRA 40cm Cut-Resistant Sleeve

  • Soft and breathable cut-resistant sleeve
  • Essential for panel handling, glass installation and metalwork
  • Shields the wrist, forearm and bicep area against cuts and inicisons
  • Lightweight fabric stays in place and prevents "run up"
  
Our price: Our Price:  £13.33 (exc VAT)
£16.00 (inc 20% VAT)

ATG MaxiCut 89-5740 ULTRA 40cm Cut-Resistant Sleeve

ATG understand that there's more to hazardous environment protection than just safety gloves. The ATG MaxiCut 89-5740 ULTRA 40cm Cut-Resistant Sleeve is the perfect accompanying garment for any serious workwear outfit.

Granting cut, laceration and incisions protection to the wrist, forearm and bicep sections of the arm, the ATG MaxiCut Cut-Resistant Sleeve is incredibly breathable and can be worn underneath a t-shirt, jacket or jumper. We recommend sleeves to builders, construction workers and installation pros who regularly handle glass, metal and blades.

What's Included?

  • 1 x MaxiCut Sleeve

Which Sleeve Size Is Right for Me?

The ATG MaxiCut ULTRA Mechanical Resistance Sleeve is available in two different sizes. To find out which size is right for you, please measure the width of your wrist and consult the sizing chart below:

Sleeve Size Wrist Width Total Sleeve Length
Small (Size 7) 85mm 450mm
Extra Large (Size 10) 93mm 450mm

ATG MaxiCut Sleeve Protection Ratings

Just like safety gloves, sleeves are assessed under EN 388 to determine their mechanical resistance rating. Please view the information below to find out which ratings apply to the ATG MaxiCut ULTRA Sleeve:

EN 388: Mechanical Resistance

  • EN 388: 3442C

EN 388 is a European regulation that determines a fabrics' resistance to abrasion, cut, tear and puncturing. It involves lowering a sharp implement tip onto the fabric to see how much force it takes to cause visible damage.

Standard Resistance Rating
Abrasion Resistance Level 3
Cut Resistance Level 4
Tear Resistance Level 4
Puncture Resistance Level 2
ISO Cut Resistance Level C

Key Features and Benefits

  • Level C cut-resistance guards the entire arm against cuts, lacerations and incisions
  • Essential wear if you handle sharp metal, glass or blades in the workplace
  • Complete EN 388 mechanical workplace hazard protection
  • 360° of protection of protection thanks to total cut-resistant fabric
  • Single 40cm sleeve promotes targeted protection
  • Highly breathable fabric allows odour and sweat to exit the sleeve naturally
  • Available in two different sizes

Suitable Applications and Environments for Use

A sleeve is a versatile garment that can be worn in a range of different environments. Please view the list below to get an idea of which professions suit the ATG MaxiCut Sleeve:

  • Blade Handling
  • Builders
  • Carpenters
  • Construction
  • Glass Handling
  • Handling Sharp Objects
  • Machine Operation
  • Roofing
  • Scaffolding
  • Sheet Metal Handling
  • Warehouse
  • Woodworking

Zero Compromise on Quality

Please view the video below to find out more about ATG's commitment to quality:

Why Bother With a Workwear Sleeve?

Handling heavy-duty material requires heavy-duty protection. Protecting your hands with safety gloves is simply not enough.

Whether you're handling sheet metal, operating machinery or lugging sharp material and equipment around on-site, you cannot guarantee where a blade, misfiring machine part or serrated edge might make contact with. A sleeve extends cut-resistance protection all the way up the arm, giving you assurance that any freak accidents aren't going to cause serious injury. 

How Far Up the Arm Does an ATG Sleeve Go?

As pictured in the image below, the ATG MaxiCut 89-5740 Sleeve runs from the wrist, all the way up the forearm to rest at the crotch of the elbow, providing protection against an incredibly vulnerable area. Premium quality foundation material ensures the sleeve does not "ride up" or roll down the arm to expose skin.

Mechanical resistance sleeve

360° Protection

Some sleeves skimp on protection by only offering cut resistance in specific areas. ATG buck the trend, guaranteeing complete protect to any area covered in fabric.

From front to back, top to bottom, this lets you get on with what you do best knowing protection against lacerations, cuts and tearing is totally covered.

What Does Level C Cut-Resistance Actually Do?

Garments accredited with a Level C rating are suitable for a wide range of uses, including areas where contact with blades and sharp edges is common. Level C garments tend to be a nice blend of medium/heavy protection and relatively lightweight fabric which still allows for a great deal of dexterity and manoeuvrability in the workplace.

Comfort and Breathability

Ask any tradesmen what they want out of a garment and you'll find that breathability and comfort are right up there. There's nothing worse than getting home and finding your skin is damp, smelly and irritated.

The ATG MaxiCut Mechanical Resistance Sleeve is made with 100% breathable fabric, ensuring sweat, moisture and odour are released throughout the day to prevent irritation and the build up of smell.

How Comfortable Is an ATG MaxiCut Cut-Resistant Sleeve?

In terms of concerns, for ATG, comfort is at the top of the pile. They understand that as protective as a sleeve may be, it's useless if it can't be worn all day long.

The ATG MaxiCut Sleeve is made from uncoated naked lining material, meaning it's skin-friendly and as soft as can be. Suitable for wear under clothing, the fabric flexes naturally with your arm, promoting freedom of movement no matter what your application.

Complete Your Workwear Wardrobe

Click the link below to check out our full range of ATG Safety Gloves and find a suitable pair to match your sleeve:

Additional Documentation

Be the first to Write a Review for this item!

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually displayed at the top of the page before adding the product to your basket. For products marked "In Stock Now", these will normally be dispatched either on the same day (if placed before 14:00 on a working day) or the next working day.

Please contact our Customer Care Team on 020 7501 0598 for an up-to-the-minute delivery expectation for this product.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Order Value UK Delivery Charge
Up to £39.99 £4.95
£40.00 and over FREE