ATG MaxiCut 44-505 Cut-Resistant Manual Handling Gloves
ATG MaxiCut 44-505 Cut-Resistant Manual Handling Gloves are designed for use in fast-paced environments where glass panels, metal, sheet steel and other hazardous and sharp materials are handled on a daily basis. ATG MaxiCut 44-505 Gloves combine Level C cut-resistance rating and a reinforced thumb crotch to guard against abrasions and enhance shelf life and grip strength.
What's Included?
- 1 x Pair of Cut-Resistant Gloves
Which Size ATG Cut-Resistance Work Gloves Are Right for Me?
To find your perfect size, simply measure the circumference of your palm (ignoring the thumb area) and the length of your hand as indicated in the image below. Once you have your measurements, please consult the sizing chart below to find the correct size for your hand.
| Size | Palm Circumference | Hand Length |
| Size 7 (Small) | 178mm | 171mm |
| Size 8 (Medium) | 203mm | 182mm |
| Size 9 (Large) | 229mm | 192mm |
| Size 10 (Extra Large) | 254mm | 204mm |
Key Features and Benefits
- Maximum Level 4 abrasion and tear resistance under EN 388
- Essential for handling glass panels, blades and sheet metal
- Cut-resistant foundation protects against lacerations and incisions
- Nitrile coating enhances grip strength in greasy and oily conditions
- Designed specifically with cargo handling professionals in mind
- Designed for use in contact with grease, oil, petrol and other slick substances
- Flexible and dexterous design makes for a lightweight pair of gloves
- Available in four different sizes for a guaranteed perfect fit
MaxiCut 44-505 Protection Ratings and Safety Standards
EN 388: Mechanical Resistance
EN 388 is a European regulation governing the sale of gloves used for safety and protection. It determines the gloves' performance when used for protection against mechanical machinery by measuring the fabric's abrasion, cut, tear and puncture resistance.
The EN 388 cut resistance test uses a single sharp implement to repeatedly pressure a glove in order to determine the amount of force required to cause visible and functional damage.
| Standard | Resistance Rating |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 4 |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 2 |
| ISO Cut Resistance | Level C |
Maximum Abrasion Resistance
Abrasion resistance is often under-looked in terms of EN 388. MaxiCut Cut-Resistant 44-505 Safety Gloves have been awarded the highest possible Level 4 rating. This indicates they can withstand a tonne of traffic, constant contact and wear before showing any sign of breakage, tearing and splits.
Which Applications and Environments Suit 44-505 Safety Gloves?
Following on, we have put together a list of professions and environments that we believe suit ATG MaxiCut 44-505 Safety Gloves perfectly. Please view the list below to take a look:
- Assembly
- Builders
- Cargo Handling
- Construction
- Glass Handling
- Machine Operation
- Maintenance
- Metalwork
- Oil Handling
- Roofing
- Scaffolding
- Warehouse Work
- Woodwork
Discover the MaxiCut Range
ATG's MaxiCut range features a selection of mechanically resistant safety gloves. Please view the video below to see what the technology used in this range can do to protect your hands at work:
Oil-Resistant Outer Coating
Oil and grease regularly conspire to compromise your grip strength and stability. Even if you can't see them, particles often linger on the glove face, causing material to slowly slide down your hand. MaxiCut 44505 Safety Gloves use a premium-quality nitrile coating to absorb harmful particles and prevent this from happening.
What Are the Benefits of a Nitrile Coating?
Nitrile is an incredibly flexible coating that provides additional resistance to oil, fuel and chemicals. Nitrile is used as a protective coating in gloves because it matches the pliability of latex with the hazard and injury protection properties of a heavier, woven glove.
What Are the Benefits of a 3/4 Coating?
For many professionals, a 3/4 coating is their go to. It allows the back of the glove to breathe naturally, releasing odour and perspiration without compromising your safety. The palm and fingers remain coated, allowing you to carry, lift and transfer material without interference.
Rough and Tough Reinforced Thumb Crotch
Fed up your gloves tearing at the thumb? This recurring issue is a problem for tradesmen everywhere. ATG recognise this and manufacture their MaxiCut Gloves with a reinforced thumb crotch.
This means when you make a fist, lift heavy material or flex your fingers, the vulnerable ridge area between the thumb and index finger flexes with you, guarding against rips and splitting.
What Are MaxiCut 44-505 Gloves Made From?
- Coating: Nitrile Butaadiene Rubber
- Liner: UHMWPE-Glass-Nylon, Spandex
Additional Documentation
