Ansell AlphaTec 39-122 Reusable Chemical Resistant Gloves 12.2"
It's important to keep your skin safe and covered when working with chemicals, and avoid direct contact to prevent injury. With the Ansell AlphaTec 39-122 Reusable Chemical Resistant Gloves 12.2" you can be sure of optimal protection that extends to food-handling, and cleaning and janitorial tasks too. The high level of abrasion-resistance will also allow you handle coarse materials with minimal risk of grazing or injury.
Key Information
- Glove Code: 39-122
- European Standards:
- EN388: 4111B
- EN407: X1XXXX
- EN ISO 374-1: Type B: JKT
- EN118: EC-regulation 1935/2004 & EC-regulation 2023/2006
- EN ISO 374-5: Bacteria and fungi
- Size Range: 7 - 10
- Supplied as a pair
Resistance Of the Ansell AlphaTec 39-122 Gloves
The Ansell AlphaTec 39-122 Gloves have been tested in accordance with EU standards to ensure high performance levels. Please find the results below:
EN388:
| Hazard | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 1 |
| Puncture Resistance | Level 1 |
| ISO Cut Resistance | Level B |
EN407:
| Hazard | Resistance Level |
| Burning Behaviour | N/A |
| Contact Heat | Level 1 (100°C) |
| Convective Heat | N/A |
| Radiant Heat | N/A |
| Small Splashes of Molten Metal | N/A |
| Large Splashes of Molten Metal | N/A |
EN ISO 374-1:
| Chemical | Breakthrough Time |
| n-Heptane | >480 minutes |
| Sodium Hydroxide (40%) | >480 minutes |
| Formaldehyde (37%) | >480 minutes |
EN ISO 374-5:
These gloves meet the European Standards for protection against bacteria and fungi.
Food Declaration:
These gloves adhere to the EC-regulation 1935/2004 and EC-regulation 2023/2006 for Good Manufacturing Practices (GMP) for materials and articles intended to come into contact with foodstuffs.
Uses Of the AlphaTec Chemical Resistant Gloves
The Ansell AlphaTec Chemical Resistant Gloves help to keep your hands safe while handling hazardous substances and coarse materials. These protective gloves are well-suited to chemical, automotive aftermarket, and metal fabrication industries.
Recommended job-tasks for these gloves include (but are not limited to):
- Light-duty chemical handling and processing
- General, low-risk handling tasks
- Handling of rough or coarse materials
- Cleaning and janitorial work
- Food handling
- Food processing and packaging
- Oil, fluids, and filter changing
- Applying a finish to materials
- Adjusting panel parts and components
- Supporting and maintaining production lines
- Repairing and maintaining equipment
- Assembling and disassembling of equipment
Key Features and Benefits
- Pair of reusable nitrile chemical protection gloves
- Suitable for use in automotive aftermarket, chemical, and metal fabrication industries
- Excellent abrasion resistance enables the safe handling of coarse materials
- Chemical resistant design helps to protect hands against a selection of hazardous substances
- Level 1 contact heat resistant protects hands during brief, intermittent contact with materials up to 100°C
- Glove resistance to bacteria and fungi reduces the risk of contact contamination
- Cotton liner assists with reducing and absorbing perspiration for maximum wearer comfort
- Hand fatigue managed and minimised with the pre-flexed and curved finger with winged thumbs design
- Compliant with food-handling standards for hygienic handling of various foodstuffs
- Rough glove finish optimises grip in both wet and dry conditions
- Latex-free construction makes these suitable for latex-allergy sufferers
- Available in a range of sizes so you can find a comfortable fit
Alternative Designs
If you want a slightly longer-cuff design on your protective gloves, try the Ansell 39-124 Reusable Chemical Resistant Gloves. The 39-122 model is 12.2" total in length, while this alternative 39-124 model is 13.8" total in length.
Sizing Of the Reusable Nitrile Gloves
The AlphaTec Nitrile Gloves are available in a range of sizes, making it easy to find the most comfortable fit for your hands. To discover which size is right for you, start by measuring the length of your hand and the circumference of your palm (as seen below).
Once you have these measurements, compare them to the table below to find out which glove size you should choose. If your measurements fall between two sizes, it's best to choose the larger size for a more comfortable fit.
| Size | Palm Circumference | Hand Length |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
Materials
- Liner: Interlock cotton
- Coating: Nitrile
- Construction:
- Cuff Style: Gauntlet cuff
- Grip Design: Rough finish
Additional Documentation
