Tool@rrest Adhesive Self-Amalgamating Silicone Tape

With its versatile and customisable design, the Tool@rrest Adhesive Self-Amalgamating Silicone Tape lets you safely and securely attach your hand tools to lanyards or tethers (Like the Tool@rrest Tether Tail Stainless D-Ring). Being self-amalgamating means that the tape is extremely strong, resistant to water and heat, and electrically insulating. Using tools while working at height can be really dangerous, but Tool@rrest makes it safer and easier.

What's Included?

• 1 x Roll of Silicone Tape

Please Note: the hammer in the picture above is not included.

What is the Maximum Safe Working Load of the Tape?

The Tool@rrest Tape is graded for a safe working load up to 2.5kg.

What Kind of Tools is the Tool@rrest Tape Designed For?

The versatile tape design can be used on a wide variety of hand tools. This includes wrenches, screwdrivers and hammers, or anything with the handle space for the tape to wrap around.

What Does Self-Amalgamating Mean?

This Tool@rrest Tape is self-amalgamating, which means that it has a number of useful qualities including but not limited to:

• Strength
• Durability
• Water resistance
• Heat resistance
• Electrical insulation
• Self-adhesive

Designed Especially for the Tool@rrest Tether Tail Stainless D-Ring!

This Tool@rrest Tape is really versatile and can be cut to whatever length you need for your own circumstances. However, it is also designed to work really well with the Tool@rrest Tether Tail Stainless D-Ring, as seen in the video below. You can use the Tape to secure the Tail to a tool, safely and easily.

How Does the Tool@rrest Tool Tether Work?

How you use the Tool@rrest tape depends on your particular drop prevention scenario and the tool you are using, but here is how to secure a tool like a hammer to a tether (Like the Tool@rrest Tether Tail Stainless D-Ring) or lanyard.

1. Weigh the tool you want to attach make sure it is under the safe working load of both the tape and what you are attaching it to (2.5kg)
2. Use a tape measure and knife to cut a 50cm length of the Tool@rrest Silicone Tape
3. Remove the plastic film from the back of the tape
4. Lay the tether or lanyard you are using on top of the hammer or other tool, with the D ring or carabiner poking over the bottom of the tool
5. Wrap the tape tightly and evenly around the tool and tether, moving downwards
6. Use the hanging D ring or carabiner to secure the tool to a lanyard, harness, scaffolding or other structure

For more information and a visual demonstration, please see the video below:

Documentation

• Conformity Statement

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually displayed at the top of the page before adding the product to your basket. For products marked "In Stock Now", these will normally be dispatched either on the same day (if placed before 14:00 on a working day) or the next working day.

Please contact our Customer Care Team on 020 7501 0598 for an up-to-the-minute delivery expectation for this product.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.